Florida Cypress
Wood Products

Call Us! (904) 353-3001

floridacypress@floridacypress.com

HomeAbout UsAbout CypressPatternsGalleryContacts Us

Other Patterns Available

Here is a small sampling of many other popular patterns that we regularly produce.  
 
1x4,8,10" T&G V-Joint  Click here for Specs on 1x6 T&G V-Joint 
Non-standard T&G V-Joint includes 1x4 (3 1/8" face), 1x8 (6 7/8" face), and 1x10 (8 7/8" face). 
Please refer to the 1x6 T&G V-Joint specs, but substitute the face value above. 
  

1" Shiplap  Click here for Specs on 1" Shiplap. 

Copy of shiplap1.gif (3172 bytes) 

1" S2S & Center-Match   Click here for Specs on1" S2S & Center-Match 

(Can also be referred to as "T&G Center-Match )

Copy of 1x6tgcmgif.gif (4247 bytes). 

 

Drop Siding Pat. #105   Click here for Specs on Drop Siding Pat. #105. 

Copy of drop105.gif (5730 bytes) 

 

Drop Siding Pat. #119   Click here for Specs on Drop Siding Pat. #119. 

Copy of Copy of pat119.gif (4795 bytes) 

 
 

Drop Siding Pat. #121   Click here for Specs on Drop Siding Pat. #121. 

Copy of pat121.gif (6198 bytes) 

 
 

Drop Siding Pat. #125   Click here for Specs on Drop Siding Pat. #125. 

Copy of pat125.gif (5123 bytes)  
 

 

Drop Siding Pat. #139   Click here for Specs on Drop Siding Pat. #139. 

Copy of pat139.gif (4214 bytes) 

 
 

Drop Siding Pat. #143   Click here for Specs on Drop Siding Pat. #143. 

Copy of pat143.gif (4137 bytes) 

 
 

Drop Siding Pat. #145   Click here for Specs on Drop Siding Pat. #145. 
  
 
 
 
 3/4x4 DB Ceiling  Click here for Specs on3/4x4 DB Ceiling.  
 

Copy of 34x4db.gif (10240 bytes) 

We also produce Cypress Shingles.

Here are the specifications:

"Old Growth" Heart Cypress Shingles
1) All fractional widths between and including 4" to 8".
2) Butt thickness 5/8", with 1/8" thickness at the skinny end.
3) Length is typically 18". 20" & 24" can be produced as well.
4) 4 Bundles to the square, one square covers 100 Sq Ft..
5) The grade is clear of all defects, 100% all heart, flat sawn and vertical grain mix.
6) The texture is planer smooth one face, reverse face is re- sawn.

We supplied this product to John G. Waite and Associates, a highly acclaimed restoration architect firm out of Albany, New York. The project was the faithful and thorough restoration of Davidge Hall (circa 1810) at the University of Maryland, the oldest continuously operated medical amphitheater in the world.

OTHER PRODUCTS

-Base Molding
-Beaded Ceiling
-Beams
-Case Molding
-Columns
-Crown Molding
-Decking, floor and roof
-Facia Board
-Flooring, wood

-Hand Rail
-Jamb
-Lap Siding
-Posts
-Roof Decking, tongue and groove
-Shavings
-Timbers
-Rafter Tails

 

 

Home | About Us | General Information | Technical Aspects | Installation | Bora Care |
Fire Retardants | Standard Patterns | Question | Gallery | Other Patterns | Contact Us